3M™ Neoprene High Performance Contact Adhesive 1357, Gray/Green

Description

This product is considered hazardous materials when shipping through Air and Ocean transportation shipping methods.

The 5-gallon size can only be shipped through Ocean transportation methods and cannot be shipped through Air transportation methods.

The 1-gallon size can be shipped though Air, Ground, and Ocean transportation methods.  A $120 hazardous materials shipping fee will apply to Air transportation shipping methods.

• High performance laminating contact adhesive
• Adheres, sheet metals, such as stainless steel, aluminum, cold rolled steel and many plastics to numerous other substrates
• High performance laminating adhesive
• Excellent moisture and heat resistance and will perform up to up to 300°F/148°C
• Available in tubes, cans or pails

3M™ Neoprene High Performance Contact Adhesive 1357 is a versatile, solvent based adhesive. It offers high immediate handling strength and good heat resistance, and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination.

Adheres Stainless Steel, Aluminum, Cold Rolled Steel and Many Plastics
3M™ Neoprene High Performance Contact Adhesive 1357 has played a significant role in 3M’s portfolio of contact adhesives for 50-plus years. Since its inception in 1954 it has become one of our most versatile solvent-based adhesives for heavy duty surface laminations. This adhesive bonds to plastics and metals, including sheet metal, stainless steel. It provides excellent heat and water resistance, performing in temperatures up to 300°F/148°C. 3M™ Neoprene High Performance Contact Adhesive 1357 dries quickly while allowing time for positioning and adjustments without slowing down work processes.

Applying Your Adhesive
Whether it is being brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.