Description
This product is considered hazardous materials when shipping through air transportation shipping methods. A $120 hazardous materials shipping fee will apply to air transportation shipping methods.
Designed for traditional sign painting, these oil based lettering enamels provide superior vibrancy, flexibility, durability, and single stroke coverage. Specified for fine, sign paint lettering on store fronts and vehicles, the vibrant colors of 1 Shot Lettering Enamels spread evenly and offer outstanding hiding, durability and fade resistance. Superior flow characteristics assure the virtual absence of brush marks and provide a clean, sharp edge. Ideal for use on interior or exterior metal, glass, wood, and enamel receptive banners and vinyl.
Optional Products
Hardeners: 4007 Hardener (No more than 10%.)
Reducers: ZZ6000 Cromaflow Enhancer, ZZ6001 Low Temperature Reducer, ZZ6002 High Temperature Reducer
Additives: 4329500 Clear Flattening Paste (no more than 50%), Dana Color D406 Smith’s Cream Blending Agent (no more than 10%)
Directions For Use
Surface Preparation:
- Apply over clean, dry surfaces which are free from wax, grease, dust, chalk, etc., and have been primed with the appropriate 1 Shot/Chromatic Primer.
- Prime most rigid plastics, (including polystyrene, PVCs and PVFs) with Chromatic 5004 Clear Vinyl Primer. Prime most flexible plastics, synthetics, (including vinyl, many awning materials and non-ERC prepared banner materials) as well as leather and faux leathers with Chromatic Ti-Cote Primer Barrier (4331010 Gloss/4331011 Flat)
Mix Ratios:
- Use only 6000series reducers (ZZ6000, ZZ6001, ZZ6002).
- For brush applications, use no more than 10% reducer or flow enhancer as needed to maintain desired flow characteristics and brush control.
- For spray and airbrush applications, use no more than 25% ZZ6001 Low Temperature Reducer.
- Do not reduce Lettering Enamels for roller applications.
Application:
Brush, roller, airbrush or spray
Drying Times:
- Dry to touch: 2 to 5 hours
- Dry to handle: 8 to 12 hours
- Dry to recoat: 12 to 16 hours
Drying time is best when temperature is above 65°. Between 50° and 65°, drying time is much slower. Paint will not completely dry below 50°.
Total Film Build:
None required. Color dependent.
Equipment Cleaning:
- Clean equipment with mineral spirits
- Clean brushes with 4004 Brush Cleaner
Technical Data:
VOC Less Water Less Exempts - Ready to Use (package/as is)....................2.87-4.36 lbs./gal (344-523 g/L)
VOC Less Water Less Exempts - w/ 10% hardener........................................2.95-4.31 lbs./gal (353-517 g/L)
VOC Less Water Less Exempts - w/ 10% reduction or flow enhancer.......3.21-4.57 lbs./gal (385-548 g/L)
VOC Less Water Less Exempts - w/ 25% reduction......................................3.62-4.81 lbs./gal (385-548 g/L)
Solids by Weight - Ready to Use (package/as is)..............................................50.3-74.9 %
Solids by Volume - Ready to Use (package/as is).............................................38.6-56.9 %
Theoretical Coverage - Ready to Use (package/as is)......................................619-913 sq. ft./gal at 1 mil, 100% transfer efficiency
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.